CENTRIFUGAL PUMP
The Centrifugal Pump, with a fluid delivery rate of 15 – 18 barrels per minute, is a diesel driven pump fitted with 4” suction and discharge manifolds. All our pumps are equipped with clutches that enable engine disengagement from the pump while engine is still running. The whole unit is skid mounted
UNION TX-90 SPECIFICATIONS
Union TX-90 triplex pump, #3 Monel fluid end with 2.875" plungers, disc valves, 8.33:1 internal gear, Cummins 6BT diesel engine, rebuilt Fuller Roadranger RTO11609A manual transmission, control panel, fuel tank, toolbox, plunger lubricator, shear relief valve, pressure gauge, suction stabilizer, discharge dampener. 10,700 lbs. 6'8" Wide, 15'8" Long and 8' 6" High
CARTRIDGE FILTER
Our twin Cartridge filter units come with varying sizes holding between 40 to 100 cartridges with maximum recommended flow rate of 12.6bbl/min and a working pressure of about 105 psi (7bar). The two pods can be used jointly or separately through a valve arrangement. There are all skid mounted.
SLURRY TANK
The Slurry (Mixing) Tank is dual compartment enabling simultaneous precoating and body-feeding during operations with the use of two Filter Press in parallel rig up. There also come with their body-feed vacuum pump attached. The slurry mixture is air-agitated to obtain the mixing.
FILTER PRESS
We have the DE Filter Press of 1200 sq. ft effective filtering area, which makes them very effective in handling normally required modern rigs demand. There come with either the standard 4” QC or WECO connections and are skid mounted.
STAINLESS TANK
There come in different sizes, our stainless storage tanks are best suited for storing all drilling and completion fluids.
CENTRIFUGAL UNITED PUMP 8BFH
4 stage horizontal split case centrifugal pump with 13” impellers, 10 inch ANSI 600# suction connection with suction Strainer and Mag flow meter with pressure gauges, 8 inch ANSI 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 1875 HP at 1900 RPM, with pneumatic clutch, and Cotta G01915E-1 gear increaser with 1.89:1 ratio. Package has PLC touch screen with engine controls integrated into the same panel.